myfritz.net Login - 192.168.1.1

myfritz.net Login is the best way to access the router settings and all you need is a computer, smartphone or a tablet in order to do that. FritzBox is one of the finest gigabit routers that uses the mesh framework of networking. The router comes with a built-in repeater that can be configured from the admin panel. You can use http://myfritz.net in order to access the router interface. Alternatively, you can also use the IP address/default gateway: 192.168.178.1 (or click on http://192.168.178.1). Just be sure that your device is connected to the same network that is hosted by your FritzBox router.

Here is what all you can configure using http://myfritz.net:

You can always change your wireless network’s password with just a few clicks using myfritz.net. Using a secured password (and changing it occasionally) is advised.
Network SSID (WiFi name) can also be changed using the admin interface. FritzBox sets up a default SSID that you would want to change.
You can change the default router credentials as well (highly recommended).
Other configurations related to DSL, home network, and telephony can also be done using myfritz.net.
The interface is simple and easy to understand. This way, you will find it easy to work around and tweak the settings.
DNS routing, QoS routing, blocking websites, and MAC (devices) addresses are some additional things that can be done over here.

How to access myfritz?

Once you have connected your system to the network and the modem shows an active internet connection, you can do the following steps:

Open Chrome (or any other web browser of your choice).
Type 192.168.178.1 or http://myfritz.net (or click on http://192.168.178.1) and hit Enter.
Wait for a couple of seconds and you will get a login screen.
Here are the default credentials that you will have to use for the very first time:

Username: admin

Password: afbecd1234

Hit Enter and you will be logged in.
In case you forget the password, don’t worry since it is printed at the back of the router.

Steps to change the Frtiz!Box router password

You should not use the default login credentials for long (especially admin credentials). Anybody can log in to the router and harm the network, or even worse, install a virus. So, in order to change the router’s credentials, here is what you need to do:

Login to the router using the same steps mentioned earlier.
Once you see the Admin Panel interface, go to Router Management.
Router Management > Users.
Select admin and then you can change the admin name (not advised).
Under the password field, enter the current password and type the new password.
Click on Save & Apply.
Wait for 10 seconds for the changes to take effect.
Done.

How to change SSID & Password?

You should add a strong password for your wireless network and the name should be legible as well. Firstly, connect your computer/phone to the Frtiz!Box WiFi. Here are the steps you need to perform after that:

Open your web browser (on your computer or phone) and type 192.168.178.1 or click on http://myfritz.net/
Login using the admin credentials for your router.
Go to Network Settings > Wireless 2.4Ghz or 5Ghz Settings > Security Mode.
Change the SSID as per your liking.
Select the WPA-type security option for the SSID and set a secured password.
Click on Apply.
Your router will reboot.
Settings will be applied once it has rebooted.
Done.

How to factory reset the myfritz.net router?

In case you wish to reset the router to factory settings then myfritz.net can help you with that as well. You can reset the router from the admin panel easily. Do this: