Speedport.ip: In case you are looking for a way to configure your router then you are at the perfect place. At speedport.ip, you will get every bit of necessary information on how to do your router’s setup with ease. Firstly, you need to know your IP address (or the default gateway). Generally, this default gateway is 192.168.1.1 or 192.168.0.1 and you can find that out using command prompt as well (Windows). Simply open the command prompt and type ipconfig and hit Enter. You will get to see your router’s IP address under the gateway tag.
Apart from just configuring your router, a lot of other cool things can be done using the admin panel. Here are some of the popular configurations that can be applied:
- You can set up the local admin password for the setup admin panel.
- WiFi passwords and SSIDs can be changed at any point of time.
- You can update your router’s firmware in order to use some new features.
- Other maintenance options can be done with just a few clicks.
- Speedport.ip has configs that let you use your router as a wireless repeater.
- You can block certain websites from being accessed via your network.
- Devices can be blocked from being accessed from your network as well.
So, as you can see that in order to have a great overall internet experience, speedport.ip is really beneficial. It will let you configure your network like never before and improve the overall throughput.
How to login to the router’s admin panel of Speedport.ip
There are two ways using which you can access the aforementioned panel.
Default way:
- Open any web browser and type 192.168.1.1 (or 192.168.0.1).
- Wait for the page to load up.
- At the password screen enter the username: admin and enter the password: admin.
- Wait until the page loads up.
- You have successfully accessed your router’s admin panel.
Alternate way:
- Go to http://speedport.ip from any web browser.
- Click on ‘Router Admin Page’.
- Once the page loads up, simply login using the default credentials.
In case you find the default credentials too naive or weak then you can get them changed at any point of time. In fact, even the router brands encourage people to set a powerful administrator password. Here is how you can do that:
- Go to your web browser.
- Type 192.168.1.1 in the address bar and hit Enter.
- Login using the default credentials (admin and admin).
- Once you are inside the admin setup panel, go to Setup & Maintenance.
- Setup & Maintenance > Users > Admin.
- Change the username and password from over there and click on save.
- Wait for the router to restart and your login password will be changed.
Changing the WiFi name and password
Another really cool feature of speedport.ip is that you can change the wireless settings over here as well. Never keep your wireless network without a password as it can be hacked and connected devices can be harmed. So, here are the steps that you need to follow:
- Login to your router’s admin setup panel using the steps given earlier.
- Go to Wireless > Select your wireless mode (2.4Ghz or 5Ghz) > Security Settings.
- Over there you will see SSID and WPA pre-shared key.
- The SSID is your wireless name. Change it as per your liking.
- Make sure that you have WPA pre-shared key checked and then select the security mode: WPA-2/PSK (most secure).
- Set the pre-shared key, or the WiFi password (choose a strong password).
- Once you are done with setting an SSID and password, click on save.
- The router will reboot. Wait for it to restart in order for the settings to be effective.
- Done.
How to factory reset the router?
In case you wish to restart the router management process then you can always factory reset it. Here is how you can do that:
- Login to the admin setup panel.
- Go to Setup & Maintenance.
- Go to Factory Reset > Click on Factory Reset Router.
- Wait for the router to restart.
- Factory settings will be applied after it restarts.
Note: Same can be done using the reset button given the back of the router. Just hold the same button while the router is still turned on and you will be able to reset it in no time.
